QT40-3C Small Egg Laying Block Machine – Efficient Brick Production Equipment

1)Main Technical Parameters              

Technical parameters
molding	2pcs/mould
frequency	2400r/m
productivity	1300-2000pcs/day
hydraulic method	mould virbration
demold method	motor-driven
turning method	motor-driven
total power	5KW
total mass	1050kg
Molding cycle	45S
turning method	crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes.
total power	concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.
total mass	widely used in buildings, road pavers, squares, gardens, landscaping, city constructions, etc.

2)Productivity:

Item	Sample	Size	Quantity	Cycle molding
Hollow block		400×200×200 mm	2pcs/mould	40~45s
		400×150×200 mm	3pcs/mould	40~45s
		400×120×200mm	3pcs/mould	40~45s

3)Good reason to choose the machine
QT40-3C Movable Type Block Machine is easy in operating and durable in use. Only with 100-300Sq. meters of concrete floor, it can be installed to use. Also, for this machine, it no needs to use carriage plates. For less investment and quicker results, it is an ideal choice for small sized block factory. Only with1-2 workers, it is enough for operating this machine

4)Other Information

Working Shed		Other
Working Site:	300sq.m	Staff and Workers:	1-2
Working Shed:	300sq.m	Power Distribution:	18kw
Raw Material Work Shop:	300sq.m	Water Consumption:	3T/day
Office:	30sq.m	Commercial Power:	380V/50Hz

5)Raw materials of the brick: 
a)Wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes, chemical residue, sand, stone, concent, cement, construction wastes and so on. therefore, it is a new tpye of machine which has the characteristics of energy conservation and environmental protection. 
b)8-10% cement, 30-40% sand, 50-60% crushed stone ( you can add some other material by local situation). 
6)products of the machine

7)company Information
  Linyi Yingcheng International Trade Co.LTD,was established on Fouda  Intelligent Manufacturing Co,LTD.It is located in Linyi city,near Qingdao port.The company is a national large scale designated wall material machinery manufacturer,a coalition of researching,producing and marketin,and services

8)Our services:
Pre-sale service support
According to each customer's demand and budget, we offer you the professional solution, process flow design and production equipment. More importantly, we welcome every customer to visit our factory and working machine in the site before placing the order. We will arrange cars, hotels and translators for the visiting customers.
During-sale service support
 Assist clients to finish the factory planning. Before delivery equipment to customer s, complete debugging and checking. Provide a full instruction manual for the whole system. Provide technical guidance for the installation and use of the unit, including installation advice and electrical connection. Provide unit debugging and training for the operation of the machine on the working site and coordiante the customers with check and acceptance of the unit
After-sale service support
Send technicians to installation site for the guidance, equipment adjustment and training. Provide high-quality spare parts thoughout the year, and the maintenance technicians are always ready to provide technical help.