L2 Managed 8-Port GbE UPOE Optical Switch – PoE++ for IP Cameras & Access Points

8*10/100/1000Base-T RJ45 PoE, 2*1G/2.5G Base-X SFP+ slots

Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection

Comply with IEEE802.3af PoE and IEEE802.3at PoE+ standard

DI/DO/RS485 and USB one key configuration & upgrading are optional

Layer 3 features: Support IPv4/IPv6 static routing, DHCP server

Layer 2 features: VLAN/VLAN Classification/QinQ/STP, RSTP, MSTP

Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP DDM

IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading

Support G.8032 ERPS protocol, recovery time ≤20ms

Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection

IP40 fan-less and Din-rail design

Operation temperature: -40℃ ~+75℃

With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.

Specification

Product Name: 10 port Hybrid Rate Layer 2+ Managed Industrial Ethernet PoE++ Switch

Port

8*10/100/1000Base-T RJ45 PoE (1-2 ports support PoE++ 90W)

2*1G/2.5GBase-X SFP

1*RJ45 Console port(115200,8,N,1)

1*USB 2.0 for configuration and firmware update(Optional)

Data&Alarm Port(Optional)

1 channel RS485

1 channel DI(digital input)

1 channel DO(digital output)

Network Medium

10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter)

100BASE-TX: Cat 5 or above UTP (≤100 meter)

1000BASE-TX: Cat5 or above UTP (≤100 meter)

Network Protocol

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE 802.3ae 10GBase-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

IEEE802.3af PoE

IEEE802.3at PoE+

IEEE802.3bt PoE++

Fiber Option

SFP Plugable Module(LC)

SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km

MM: 1310nm, 2Km; 850nm, 500-meter

Switching Capacity: 26Gbps 

Throughput: 38.6Mpps

Packet Buffer: 12M 

MAC Address: 16K

VLAN: 4K

Jumbo Frame: 10K bytes

Transfer Mode: Store and forward, forwarding delay<5us

MDX/MIDX: Support 

Watchdog: Support

Network Topology

Star topology

Bus topology

Tree Topology

MTBF: 200,000 hours 

PoE Protocol: IEEE802.3af(15.4W), IEEE802.3at(30W), IEEE802.3bt(90W)

PoE Wiring: 1/2(+), 3/6(-) 

PoE Budget: 240W

Power Voltage

Input Voltage: DC 44-57V(PoE af), DC 52-57V(PoE at)

Redundant power input

Removable 4-pin terminal block

Input current: 5.6A Max

Total power consumption: Full loading without PoE ≤10W

Reverse polarity protection: Support

Over-current protection: Support 

Over-voltage protection: Support

Industry Standard

EMI: FCC Part 15B Class A

Surge protection of power: IEC 61000-4-5  6KV/4KV(8/20us)

Surge protection of Ethernet ports: IEC 61000-4-5  6KV/2KV(10/700us)

RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m

EFT: IEC 61000-4-4  power interface: 4K；Ethernet ports: 2K

CS: IEC 61000-4-6 10V

ESD: IEC 61000-4-2  Level 4(8K/15K)

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Protection Level: IP40

Installation Method: Din Mounted

Security Certificate: CE/FCC/RoHS

Working Temperature: -40℃~75℃

Storage Temperature: -40℃~85℃

Relative Humidity: 5%~95%, non-condensing

LED Indicators

PWR(Power indicator), Green Color

On: power status is normal

Off: power off or power connection failure 

S(System indicator), Red Color

On: Normal operation

Off: Connection failure

Blinking: Device initialization

USB(USB status indicator), Green Color(Optional)

On: USB flash drive is detected by device

Blinking: the device is reading and writing the data from USB flash drive

Off: USB flash drive is not inserted or not detected by device

ALM(Fault status indicator), Red Color(Optional)

On: Fault alarm

Off: Device on normal working state

Ethernet Port

1. Green Indicator

On: port link up

Off: port link down

Blinking: data is in normal transmission

2. Yellow Indicator

PoE ports

On: PoE working

Off: PoE not working

Fiber port, Green Color

On: port link up

Off: port link down

Blinking: data is in normal transmission

L3 Function

ARP: ARP table aging

DHCP server

IPv4/IPv6: Static routing

L2 Function

Port aggregation

Support GE port aggregation

Support 2.5GE aggregation

Support static aggregation

Support LACP dynamic aggregation

Up to 64 aggregation groups and up to 8 ports per group

Port features

Support IEEE802.3x flow control

Support interface counters

Support port isolation

Port mirroring(One-to-One, Many-to-One)

Support loop detection(Port-based; VLAN-based)

Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)