Vertical Escape Chute for Mining Vehicles – Emergency Evacuation Slide System

Vertical escape chute system mounted on mining vehicles for rapid, safe evacuation during underground emergencies.

Vertical-Spiral Escape Chute can be installed on the wall, and only requires a clear drop to ground level. When deployed, as you travel through the escape chute you can look up and down, no smoke can enter the chute. To exit your feet will touch the ground, extract your body from the chute and walk away.

Specification
Maintenance
It have to dry after when you used, if have moist it may be change the color or damage on the Escape chute.
When inspection occurs if the following precautions: Please contact immediately the necessary action will not occur until the situation in which a person can cause serious injury.

a. When Escape chute stored during long-term storage, it occurred when corrosion or rust on the frame or supporting frame entrance folding device.
b. When Escape chute fabric land discoloration or mold, etc. bloomed.
c. When Escape chute fabric stuck or torn land.
d. When various ropes have discoloration and/or mildew and/or tears.

Escape Chute Precautions
Maintenance
1. Please use the product is used for the purpose of evacuation when the fire is put to emergency situations everywhere, if you use wrong way cause the human or material damages, serious injury or death are issued due to use depending on usage.
2. When you open the frame without careful, it may be damage with spare part and frame such as exit windows or parts attached to the frame will occur.
3. The folded device on Frame is rotated to straighten, be carefully your fingers or body parts may occur tight or bad situations.
4. If When Escape chute use with twisted on the outside or contact obstacle, it occur to shock and/or damage.
5. If Escape chute are using short or exceed the length of the rescue of 1M or more, it could not be evacuated. Be use to install the appropriate vertical descent way rescue the building and installation.
6. When you go down the exposed parts of the body should not touch on slop fabric material. When you down, it occur friction parts exposed blossomed.

Classification
ISO9001:2015 ISO14001:2015 EN ISO6941 DIN EN 20811 DIN EN ISO 13938-1:999 BS5438 DIN 14151-3. DIN 53354:1981 DIN 4102 B1 DIN 53352 DIN 53353 DIN 53363 DIN 53886 DIN 53361 NFPA 701,M2,CL2,LSG