DDCS-005-TL Hopper Weighing Filling Machine – Precision Dosing for Powders & Granules

DDCS-005-TL hopper weighing filling machine for high-accuracy dosing of powders, granules, and bulk solids.

Use and performance
DDCS-005-TL is specialized design for kinds of dosage liquid filled in small mouth container. All contacts with medium are SUS304 or 316L, such as liquid raw material, edible oil, additive, foodstuff and so on.
The main technical parameters

Model	DDCS-005-TL
Power	220V/50Hz
Air supply	flux 0.1m3/min pressure 0.4～0.6MPa
Filling speed	160-240barrel/hour
Filling range	1kg-5kg
Allowable error	±0.5%
weight	180㎏
overall size	L1650×W 750×H 1900mm

Equipment Components

Semi-automatic weight filling machine is composed of 30L hopper,filling head lifting system,filling system,weighing system,frame,capping system,control system,non-power roller and pneumatic control system.
Liquid filling and capping machine adopts Germany OB company technique. High measuring precision and can’t be influenced by material.
3. Weight value shows immediately.
4. Gross weight or net weight filling mode
5. Fast speed and slow speed of filling mode
6. In filling range, can be adjust filling weight.
7. Filling machine inlet:DN50
8. Filling head and pipeline are easy to clean and joint.
9. Feeding and filling automatically, equipped with pneumatic nipping and capping set.
10. Conveyor roller distance the ground can choose:300mm 500mm
11. Frame:fixed or movable type can choose
12. Filling and capping in one machine
13.All contact with material are made of SUS304 stainless steel, others are made of carbon steel spray paint.
Operation: barrel putting by manual, press Start button, fast and slow feeding valves start automatically. When achieves setting point 1 to shut off fast feeding valves, to setting point 2 to shut off slow feeding valve. Put on lid by worker and move drums to capping position (has assistant positioning set). Press capping button, move drums after capping. Then Warehousing.(equipped with stainless steel roller )
Standard equipment:
Meter(chimei in shenzhen)、Sensor (Mettle in Changzhou)、Pneumatic organ (Airtac or Pneulead) Explosion-proof (Feice)；
14.Buyer offers feeding pump: outlet’s pressure is ≥3-5Kg，flux≥25m3/h，filter,voltage,air source(air compressor)、inlet pipe and valve,besure the machine can working,constant voltage&constant current