CJ Electronics Technology Co., Limited

25 Mar 2026 Views

Get Your Quote Now ~~$999~~

CJ-F 1000 Series Conventional Fire Alarm Control Panel – Centralized Fire Monitoring System

CJ-F 1000 series conventional fire alarm control panel for centralized monitoring and management of building fire detection zones.

CJ-F 1000 Series Conventional Fire Alarm Control Panel

Model: CJ-F1004, CJ-F1008, CJ-F1016

The CJ-F1000 Series Conventional Fire Alarm Control Panel is a 24 volt, four, eight, sixteen-zone, Class B, Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective CJ-F1000 Series can be used in a variety of low- to mid-sized applications.

FEATURES

Four to Sixteen Style B (Class B) Initiating Device Circuits (IDCs).

All zones accept two-wire smoke detectors and any normally-open contact devices.

Zones 1 - 16 configured as general alarm zones.

All circuits are power-limited and supervised, meeting the latest ULC requirements using fuseless technology.

Two built-in, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs).

NACs may be programmed:

Silenceable.

Non-Silenceable.

Auto-Silence (program 5 to 20 minutes).

1.25 amps of NAC power.

3.0 amps of total system power.

Alarm, Trouble and Supervisory, relay output.

24-volt operation.

Resettable four-wire smoke detector power 500 mA.

Non-resettable power 500 mA.

Integral battery charger capable of charging up to 18 AH batteries (batteries over 4 AH require use of the external battery backbox, or ULC listed equivalent).

Disable/Enable control per IDC.

Reverse polarity protection.

Control buttons:

Mode

Test

ACK (Acknowledge) Alarm Silence

Reset

LED indicators:

AC Power(green & yellow LED)

Fire Alarm(red LED)

Trouble(yellow LED)

Supervisory(yellow LED)

Signal Silence(yellow LED)

Battery Power(green & yellow LED)

Zone Disable(yellow LED)

NAC Fault(yellow LED)

NAC Disable(yellow LED)

Zone Alarm(one for each zone) (red LED)

Zone Trouble(one for each zone) (yellow LED)

Earth Fault (on circuit board)

Battery Fault (on circuit board)

Charger Fault (on circuit board)

SPECIFICATIONS

AC POWER

90～270 VAC, 50 Hz, 2.0 amps.

Wire size: minimum 14 AWG (2.0 mm2) with 600-volt insulation.

BATTERY

Sealed lead-acid batteries only.

Maximum charging circuit: 27.6VDC 0.8 amp for normal flat charge.

Maximum battery charger capacity: 18AH battery.

NOTE: two 4AH batteries can be housed in the cabinet. Larger

batteries require a separate battery box.

Total 24 V system power: 3.0 amps.

Notification appliance (signal) power: 2.5 amps.

Maximum current per NAC: 1.25 amps (expandable to 2.5amps).

Maximum battery charging capability: 18 AH.

Auxiliary Outputs

Resettable four-wire smoke detector power 500 mA.

Non-resettable power 500 mA.

NOTE: Total current for auxiliary power outputs and two NACs must not exceed 3.0 amps. .Integral Form-C Alarm, Trouble and Supervisory relays, rated at: 2.0 amps 30 VDC (resistive), 2.0 amps 30VAC (resistive).

Product Specifications

Product Date 2026
Delivery cycle within 1 month
Customize Support
Price Quotation
Exit Support
OEM Quotation
Supplier CJ Electronics Technology Co., Limited
Delivery Method Land transport/Ocean transport, etc.
User Manual provide
Shippable Areas Southeast Asia and Global

Procurement Recommendation

Aerial ladder trucks must meet local height, stability, and rescue capacity requirements for urban emergency response (for reference only).

Due to market conditions, product updates, and policy changes, please contact the supplier for the latest information.

Comments

SuryaTrade2026-04-02

Looks fantastic right out of the box!
VietLinker2026-04-02

Can I specify a preferred delivery date during checkout?
Regtiso Network Tech2026-04-01

Do you offer quantity-based discounts visible at checkout?