Lab Gas Booster Pump – High-Pressure Testing & Gas Transfer System

Lab gas booster pump for high-pressure gas transfer, testing, and analytical instrument supply.

This series of pumps utilizes a single pneumatically actuated unbalanced gas distribution valve for automatic back and forth motion. The pump drive components are made of aluminum alloy or stainless steel.The maximum drive pressure is 10 bar and to ensure a long service life it is recommended that the customer use an air pressure of ≤ 8 bar.The drive piston has a diameter of 160 mm and the pump is single-acting. The pump head cools the discharged air.、

1.Compressed Air driven - no electricity required (connect to normal air compressor)In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

2.No airline lubricator required

3. Hydrocarbon free-Separation between air drive and gas booster sections

4.Wide range of models with different ratios

5.Built-in-cooling unit inside each models

6.Easy to install, operate and maintain

7. High quality seals, long life service available

8. Gas drive, No heat,flame or spark risk and explosion proof

9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant

10. All components of the contact with the gas are made of aluminum or stainless steel