FD Series Taper Medium Speed CNC Wire Cut EDM – Precision Die-Sinking Machine

1. Wire tension automatic control, No need to tighten the wire manually. Constant tension and stable accuracy.
2. the Z axis can move by automatic. No need to remove the wire.
3. Intelligent setting the cut parameter, operation is handy.
4. Wire diameter automation control. Reduction the accuracy error which caused by the change of the wire diameter.
 

Machine Type		FD500	FD630	FD800	FD1000
Table size mm		910×600	1010×680	1230×820	1410×1010
Table travel mm		400×500	500×630	630×800	800×1000
UV axis travel mm		±110	±110	±110	±110
Workpiece max .thickness mm		400	600 (can agrade1000)
Workpiece max.weight kg		600	1400	2300	4000
Machine weigh KG		1600	2400	3100	4000
Max .taper cutting	±30 (need install wire guide)
Pulse equivalent mm	0.001
Wire speed m/s	1-15(speed adjustment by frequency conversion)
Overall processing speed  mm2/min	60
The fast processing speed  mm2/min	120
The best Roughness	Ra 1.0
Wire diameter	0.10-0.20
Composite machining accuracy mm	0.01
Drive tpye	Stepper motor (Can grade AC servo motor)
Guide	Japanese THK linear guide
X Y axis screw	ball screw made in China
Bearing	Japanese NSK bearing
measurement system	Electronic ruler
Volume of the tank L	100
Tank size mm	1080×620×630
Wire cylinder stroke mm	250

We specializes in production mid-to high-end medium speed CNC wire cut EDM. Our machine equipped with wire intelligent dynamic control system. The wire tension value is constant by closed-loop control. It can continuous cutting 30000mm without wire guider and achievable high precision and good surface finish. Simple operation, stable in quality. High cost performance. Multi series to meet different customer requirements. Machine sold well in Asia, South America, and MIDE.

The important precision index. (with out wire guider!!):
1.Roughness:  Ra1.0um/30000mm.
2.Accuracy of the machining: 0.005mm.
3.Conformance deviation: 0.005mm/30pcs.
4.Longitudinal dimension deviation: 0.005/100 mm.