High Pressure Pipe Crimping Machine – Hydraulic Hose Assembly Crimper for 6000+ PSI Lines

High Pressure Pipe Crimping Machine is the main equipment for manufacturing hydraulic hose joints. By clamping the connector jacket, the connector jacket, hose and the connector inner core are integrated to form the hydraulic hose connector assembly. At present, the buckle pressure of domestic design and manufacture or press transformation is determined by experience, experiment, analogy and other methods. Therefore, the equipment capacity is too large, volume and weight is too large and other defects and deficiencies. In the process of clamping, there are shortcomings such as unstable clamping quality, low efficiency of shrinking pipe and easy fatigue of operators. The improved crimping machine not only saves manpower, but also improves the crimping quality and pipe shrinking efficiency.
The hydraulic transmission and control system is the main power source of the hose compressor, and the compressor compression process is realized through the hydraulic transmission and control system. The improved design of the mechanical structure and control system of the existing hydraulic high-pressure hose compressor can greatly reduce the overall structure of the compressor, and strive to make the hydraulic transmission and control system as simple as possible. The hydraulic high pressure hose compressor designed in this paper is a kind of pipe machinery which works on the principle of hydraulic transmission. By controlling the expansion of the piston rod of the thrust hydraulic cylinder, the inner cone slider is driven to shrink and release, and the pressure of the high-pressure hose joint is realized.

First, the basic principle of High Pressure Pipe Crimping Machine combination withholding.

The pressure structure of the hose assembly is generally composed of mountain jacket, hose and core pipe. The leakage of the hose joint refers to the leakage of the coating, hose and core pipe connection part. Therefore, this paper analyzes the coating, hose and core pipe connection part, namely the structure of the tail part of the pipe. The basic principle of high-pressure hose assembly is that the plastic deformation of the jacket under the action of external force leads to the tight adhesion of the rubber layer of the hose and the outer wall of the core tube, so as to complete the seal of the liquid medium in the hose.
(2) Design of High Pressure Pipe Crimping Machine.